Home
Scuba Diving Articles

Scuba Diving Mask
Scuba Diving Fins
Scuba Diving Snorkel
Scuba Diving Regulators
Scuba Diving BCD
Scuba Diving Wetsuits/Skins
Scuba Diving Dry Suits
Scuba Diving Boots
Scuba Diving Hoods
Scuba Diving Weights
Scuba Diving Air Tanks
Scuba Diving Computers
Scuba Diving Knives
Scuba Diving Lights
Scuba Diving Cameras

The regulator is one of the most important pieces of scuba diving equipment. Scuba diving regulators allow the scuba diver to breathe air from their tank at the lower pressure level. The main feature in the scuba diving regulator is the ease of breathing. Making sure that the regulator is comfortable and easy to use is another great feature.

Most regulators have 4 or more hoses. Regulators connect to your BCD, SPG (submersible pressure gauge), alternate air source and you.

The following are some tips on choosing the right regulator:

1. Safety is the most important element when choosing a regulator. Buying a modern regulator from reputable companies will ensure you are buying a reliable design.

2. Purchase the top model regulator. If money is an issue, purchase as high as you can. You end up saving money in the long run by buying the best regulator in the beginning. This is your breathing device and can't be ignored by going cheap.

3. Choose a regulator that allows you to breathe easily and can get serviced easily. This is important since some models you may have to ship off to get is serviced.

Make sure you maintain your regulator during and after use. The most important maintenance step is to rinse the regulator off in fresh water after using the regulator. Make sure to rinse the regulator while it is attached to the tank and while the air is still on. If you can't rinse it right away, place the dustcap on the regulator and rinse it with gentle flow or soak it. Do not press purge button while soaking since this will allow water to get into the regulator and damage it. If you can't rinse the regulator, use a salt-removing solution to remove the salt and pack away until you can rinse it. After rinsing the reguator, allow it to dry in a cool place (not in the sun).

You should get your regulator serviced as recommended by the manufacturer, after 6 months of heavy usage, when you notice any signs of damage, it is hard to breathe from, or if you notice any problem.

To check out the different regulators, Click Here!